高端电压小直流电检测仪（耐弧光检测仪）-（计算的机把控好）

High voltage low current tester (arc resistance tester) - (computer control)

类产名字大全称：耐电弧试验机

Product name: electric arc resistance tester

物料规格：NDH-A

Product model: NDH - A

符合规则：GB/T 1411-2002《固态物耐压装修材料耐高降低电流量电孤蓄电池充电的疲劳试验》（共同IEC  61621-1997）及ASTM D495等基准的条件设计制作造成的，并复合IEC 149、UL 746A等应力测试的方式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

具体使用超范围及基本功能：

本试验台机是通过应适用交流接触器、电商和家装电商等职业的焊工用朔料、硅橡胶胶和耐压漆等耐压板材的耐弧光耐热性评定标准，主适用固态耐压板材如：朔料、聚酰亚胺膜、硅橡胶、矿石、瓷砖、窗户玻璃、耐压油、耐压漆、瓦楞纸等有机溶剂的耐弧光耐热性测试测试；

本工作设计机由估算机抑制执行，能界面显示目前工作程序及工作耗时，工作结尾后并另存目前工作数据资料，并可直接打印.规定进行实验上报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 超声波焊接机为内外一梯节构，下处为实际操作模式，上面为实验设计箱。

2 本食品采用了*新智力设定技术应用，用决定子程序（IEC或ASTM）可重新实现实验室检测，并在线上上屏幕上显示试验装置进程和效果。

3 **效果稳定，抗干忧学习能力强，检查的精密度提高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断时候测量误差：小于等于 ±10ms

2 调压器储电量：2kVA

3 稳定耐压试验电阻值：12.5kV

4 试验台相电压表面粗糙度：±3%

5 感应电流操纵精确度：±10%  直流电检测的表面粗糙度：1.5%

6 参比电极对岩样的压力：（0.5±0.05）N

7 金属电极食材：钨棒

8 电极片距離：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 适用坏境工作温度：（23±2）℃

10 实用大环境含水率：（50±5）%

11 外接电源：220V±5%  50Hz  10A

12 疲劳试验    的方法：   执行标准/美标/10 mA 间断/20 mA 多次/30 mA间隔/40 mA连续式

13 试验台程度如下所述：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 设备款型：

NDH-A    耐弧光试验台仪-微机有效控制

NDH-B    耐焊弧做实验的时候仪-触屏屏调控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！