高电压降小直流电压检验报告仪（耐焊弧检验报告仪）-（折算机调控）

High voltage low current tester (arc resistance tester) - (computer control)

货标题称：耐电弧试验机

Product name: electric arc resistance tester

食品参数：NDH-A

Product model: NDH - A

满足需要标：GB/T 1411-2002《固态物电绝缘用料耐高压得过低电压电流电孤尖端放电的耐压》（一样IEC  61621-1997）及ASTM D495等原则的请求定制手工制造的，并达到IEC 149、UL 746A等校正手段

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主耍适用于范围内及功能键：

本试验装置机是按适适用于减速机、电热器设备和家庭用水器设备等产业的安装电工用塑、环氧环氧树脂胶和耐压电阻漆等耐压电阻建材的耐脉冲焊接效能评比，主适用于固状耐压电阻建材如：塑、bopp薄膜、环氧环氧树脂、矿石、瓷质、破璃、耐压电阻油、耐压电阻漆、瓦楞纸板等导电介质的耐脉冲焊接效能測試；

本检验机由换算机把握自动运行，也可以界面显示特定进行进行实验性所情况下及进行进行实验性所用时，进行进行实验性所完结后并保存图片特定进行进行实验性所数据信息，并可印刷.准则实验所行业报告。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为两排一起组成部分，上半部为运行装置，上半部为实验设计箱。

2 本物料适用*新自动化掌控工艺，经由进行程度（IEC或ASTM）可智能开展校正，并在电子产品上体现 冲击试验的过程和的结果。

3 **耐热性更好，抗抑制效果强，检查精密度较高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断用时计算误差：乘以 ±10ms

2 调压器体积：2kVA

3 额定容量校正的电压：12.5kV

4 实验相电压控制精度：±3%

5 感应电流控住导致精度：±10%  直流电测试定位精度：1.5%

6 探针对试件压为：（0.5±0.05）N

7 电极片材质：钨棒

8 电级范围：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 利用生态温湿度：（23±2）℃

10 操作环境空气湿度：（50±5）%

11 交流电源：220V±5%  50Hz  10A

12 校正    的办法：   国家标准/美标/10 mA 连着/20 mA 多次/30 mA连续性/40 mA间隔

13 实验室检测编译程序如下图所示：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 货品类型：

NDH-A    耐电弧放电耐压试验仪-微机的控制

NDH-B    耐电弧放电实验仪-触摸式屏操控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！